Skip to content

    SUNLU PETG 2.0

    PETG by SUNLU · Generic

    Get Filwiz Pro

    SUNLU PETG 2.0 is a PETG filament. The TDS lists two print bands: 230–240°C at 50–100 mm/s, or 240–270°C at 100–200 mm/s, and a bed range of 70–80°C. Drying is published at 65°C with no duration. The sheet does not publish a fan specification or a single nozzle, bed, or speed setpoint.

    Manufacturer settings

    Nozzle
    230–270°C
    Bed
    70–80°C
    Speed
    50-200 mm/s (230-240°C: 50-100 mm/s; 240-270°C: 100-200 mm/s)
    Drying
    65°C

    Source: manufacturer, retrieved 28 Sep 2026

    Starting settings for popular printers

    Start from the slicer's generic profile for PETG. Filwiz starting points derived from the manufacturer range, not manufacturer claims. Calibrate with a temperature tower.

    PrinterSlicerNozzle startBed startSpeed
    Bambu Lab A1Bambu Studio250°C75°Cup to the manufacturer max (200 mm/s)
    Bambu Lab P1SBambu Studio250°C75°Cup to the manufacturer max (200 mm/s)
    Bambu Lab X1CBambu Studio250°C75°Cup to the manufacturer max (200 mm/s)
    Creality Ender-3 V3Creality Print250°C75°Cup to the manufacturer max (200 mm/s)
    Creality K1Creality Print250°C75°Cup to the manufacturer max (200 mm/s)
    Anycubic Kobra 3Anycubic Slicer Next250°C75°Cup to the manufacturer max (200 mm/s)
    Prusa MK4PrusaSlicer250°C75°Cup to the manufacturer max (200 mm/s)

    FAQ

    What nozzle temperature for SUNLU PETG 2.0?
    The manufacturer range is 230–270°C.
    What bed temperature for SUNLU PETG 2.0?
    The manufacturer range is 70–80°C.
    Do I need to dry SUNLU PETG 2.0?
    The manufacturer publishes drying at 65°C.
    What print speed does the manufacturer list for SUNLU PETG 2.0?
    The published speed is 50-200 mm/s (230-240°C: 50-100 mm/s; 240-270°C: 100-200 mm/s).

    Related

    Diameter
    1.75mm
    Density
    1.22 g/cm³

    Related guides

    ← Back to libraryBrowse All Filaments