Skip to content

    SUNLU Silk PLA+ 2.0

    PLA by SUNLU · Generic

    Get Filwiz Pro

    SUNLU Silk PLA+ 2.0 is a silk PLA+. The TDS lists two print bands: 205–215°C at 50–100 mm/s, or 215–235°C at 100–200 mm/s, and a bed range of 50–60°C. Cooling fan is published as on, and drying at 55°C with no duration. The sheet does not publish a single nozzle, bed, or speed setpoint.

    Manufacturer settings

    Nozzle
    205–235°C
    Bed
    50–60°C
    Speed
    50-200 mm/s (205-215°C: 50-100 mm/s; 215-235°C: 100-200 mm/s)
    Fan
    on
    Drying
    55°C

    Source: manufacturer, retrieved 28 Sep 2026

    Starting settings for popular printers

    Start from the slicer's generic profile for PLA Silk. Filwiz starting points derived from the manufacturer range, not manufacturer claims. Calibrate with a temperature tower.

    PrinterSlicerNozzle startBed startSpeed
    Bambu Lab A1Bambu Studio220°C55°Cup to the manufacturer max (200 mm/s)
    Bambu Lab P1SBambu Studio220°C55°Cup to the manufacturer max (200 mm/s)
    Bambu Lab X1CBambu Studio220°C55°Cup to the manufacturer max (200 mm/s)
    Creality Ender-3 V3Creality Print220°C55°Cup to the manufacturer max (200 mm/s)
    Creality K1Creality Print220°C55°Cup to the manufacturer max (200 mm/s)
    Anycubic Kobra 3Anycubic Slicer Next220°C55°Cup to the manufacturer max (200 mm/s)
    Prusa MK4PrusaSlicer220°C55°Cup to the manufacturer max (200 mm/s)

    FAQ

    What nozzle temperature for SUNLU Silk PLA+ 2.0?
    The manufacturer range is 205–235°C.
    What bed temperature for SUNLU Silk PLA+ 2.0?
    The manufacturer range is 50–60°C.
    Do I need to dry SUNLU Silk PLA+ 2.0?
    The manufacturer publishes drying at 55°C.
    What print speed does the manufacturer list for SUNLU Silk PLA+ 2.0?
    The published speed is 50-200 mm/s (205-215°C: 50-100 mm/s; 215-235°C: 100-200 mm/s).

    Related

    Diameter
    1.75mm
    Density
    1.25 g/cm³

    Related guides

    ← Back to libraryBrowse All Filaments