NinjaTek NinjaFlex
TPU by NinjaTek · Generic
- Diameter
- 1.75mm
- Nozzle temperature
- 210–225°C (rec. 220°C)
- Bed temperature
- 20–50°C (rec. 40°C)
- Print speed
- 10–35 mm/s
- Density
- 1.21 g/cm³
85A shore hardness, most flexible TPU, direct drive required, minimal retraction, industry standard
Related guides
- How to Create a Custom Filament Profile in OrcaSlicer
- PLA vs PETG vs ABS: Which 3D Printing Filament Should You Use?
- How to Calibrate Your 3D Printer for Perfect Prints
- Best Filament Brands for Beginners in 2026
- How to Fix Common 3D Printing Problems
- How to Read a 3D Printing Filament Data Sheet (TDS)
- PLA vs ABS: Which Is Actually Stronger? Tensile Strength vs. Toughness Explained
- The Complete Guide to Drying 3D Printing Filament: Methods, Materials & Best Practices
- Budget vs Premium 3D Printer Filament: Which One Should You Actually Buy in 2026?
- How to Fix Stringing, Blobs, and Oozing in 3D Prints: The Complete Troubleshooting Guide
- Engineering Filaments: PETG, ASA, and Nylon — When and How to Print Them
- Bambu Lab High-Speed Printing: Profiles, AMS Tips, and Filament Compatibility for P1S and X1C
- PLA Heat Resistance Explained: Glass Transition vs. Melting Point
- ABS Filament Printing Temperature: The Correct Range and Why It Matters
- Is PETG Food Safe? The Truth About 3D Printed PETG and Food Contact
- PLA vs PLA+: What Actually Changes (With Manufacturer Data)
- PETG vs PLA for Functional Parts: Heat, Impact, and Print Settings
- Silk vs Matte PLA: Finish, Strength, and Temperature Differences
- High-Speed PLA vs Standard PLA: Do You Need It?